System LED's

The system LED on the front of the chassis is as follows:

Locator (LOC) LED

■   Off: Default
■   Blinking Amber: Enables device location

Refer to the Chassis (beacon CLI) section in the GigaVUE-OS-CLI Reference Guide.

System (SYS) LED

■   Off: Default
■   Solid Green - Normal GVOS operation
■   Solid Amber - System failure
■   Blinking Green - Ready for use

Power Status 1 (PWR1)

■   Off - Default
■   Solid Green - Power supply 1 functioning normally
■   Solid Amber - Power supply 1 failure

Power Status 2 (PWR2)

■   Off - Default
■   Solid Green - Power supply 2 functioning normally
■   Solid Amber - Power supply 2 failure

Fan (FAN) Status

■   Off - Default
■   Solid Green - Fans operating normally
■   Solid Amber - Fan(s) failed

Secure boot Authentication (SA) LED

■   Off - Secure boot successfully authenticated
■   1 Blink – Trusted Platform Module (TPM) chip not detected
■   2 Blinks – TPM Non-Volatile Random Access Memory (NVRAM) access error
■   3 Blinks – Invalid UEFI secure variables
■   4 Blinks – UEFI secure boot disabled
■   5 Blinks – SHA256 not found in TPM NVRAM/index
■   6 Blinks – PK hash mismatch
■   7 Blinks – Shim signature invalid
■   Solid Amber – Follows blink pattern, indicating an error